698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
691_24536_2
Topthema: Aktiv-Standlautsprecher · Loutd musegg
Kaufen oder leihen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Manley NU MU
Ausstattung & technische Daten
| Features | |
| STEREO LIMITER COMPRESSOR | |
| Manley IRON® input transformers | |
| 4 x hand-matched 6BA6 vacuum tubes | |
| Balanced XLR inputs & outputs | |
| Manley HIP function raises soft dynamics without squashing louder passages | |
| MANLEY POWER® High Voltage Switched Mode Power Supply custom designed for our vacuum tube audio circuits | |
| INPUT Level Preset 3-way switches -3dB, 0, +3dB | |
| Continuously variable OUTPUT level controls | |
| Unity Gain set INPUT to "0" and OUTPUT control to 11 o’clock. (Input source Z= 150 Ohms, Output load Z= 100 kOhms) | |
| Continuously variable THRESHOLD controls | |
| Hardwired Relay Bypass Switch | |
| Ratio Mode switches between LIMIT (1.5:1 to 12:1) or COMPRESS (1.2:1 to 3:1) | |
| HP SC: High Pass Side Chain Filter -3dB @ 100Hz @ 6dB per Octave | |
| Stereo Link establishes Left-Master dynamic control for THRESHOLD, ATTACK, and RECOVERY controls | |
| Beautiful illuminated stereo VU meters read Gain Reduction or Output Level | |
| Sidechain INSERT per channel via 1/4" TRS jack TIP=SEND, RING=Return, SLEEVE=Ground | |
| Specification | |
| Maximum input level: (1 kHz Sine, <0.3% THD+N) | -3 = +25 dBu |
| 0 = +21 dBu | |
| +3 = +18 dBu | |
| Maximum GAIN | 13dB |
| GAIN makeup | 10dB (gain above unity) |
| Output Headroom | 23dB (referenced to +4dBu) |
| Variable ATTACK control | 13msec - 130msec |
| RECOVERY switch 5 steps | 0.1s, 0.16s, 0.32s, 0.64s, 1.7sec. |
| Maximum Output | +27dBu (18Vrms) into 100K Ohm load; +24.5dBu (13Vrms) into 600 Ohm load. (1Khz Sine, < 0.3% THD+N, BW 20Hz - 20kHz). |
| Frequency Response | - 0.8dB @ 20Hz, -0.5dB @ 50kHz |
| Total Harmonic Distortion | <0.05% THD+N (1kHz Sine, +4dBu, BW: 20Hz - 22kHz) |
| Noise floor | -85dB typical (BW: 20Hz - 22kHz) |
| Dynamic Range | 112dB |
| Signal to Noise Ratio | 89dB (referenced to +4dBu) |
| Common-Mode Rejection Ratio (CMRR) | 74dB (BW: 20Hz - 22kHz, +4dBu, 1kHz Sine) |
| Output Impedance | 100 Ohms |
| Input Impedance | -3dB= 1 kOhms, 0dB= 2.5 kOhms, +3dB= 4.5 kOhms |
| AUTOMUTE warmup delay | 30 Seconds |
| Power consumption | 35 Watts |
| Standby Power Consumption | 0.5 Watts |
| Operating mains voltage | 90 to 254 VAC (internal universal supply) |
| Mains voltage Frequency | 50-60Hz |
| Dimensions= (w,d,h) | 19" x 3 1/2" x 7" (occupies 2u) |
| Unit weight | 8.5 lbs. |
