„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Millennia HV-3C
| Specification | |
| Type | Two Channel Microphone Preamplifier |
| Minimum Gain | 8.5 dB |
| Maximum Gain (1.5 dB per step, 36 steps) | 60 dB (up to 70 dB on request) |
| Frequency Response (+0 / -3 dB) | sub 8 Hz to beyond 300 kHz (sub 3 Hz by request) |
| Noise (60 dB Gain, 10 Hz - 30 kHz, Inputs common) | -133 dB EIN |
| Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out) | < .001%, Typ. < .0005% (< 5 ppm) |
| Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out | < .0009% |
| Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out) | < 2 degrees deviation |
| Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.) | > 65 dB, Typ > 85 dB |
| Slew Rate (35 dB Gain, +27 dBu Out) | > 25 Volts per microsecond |
| Maximum Input Level (20 Hz - 40 kHz) | +23 dBu (no attenuator pads required) |
| Maximum Output Level (20 Hz - 40 kHz) | +32 dBu |
| Phantom Input Impedance (1 kHz) | 6,750 ohms |
| Output Impedance | 24.3 Ohms (x2) |
| DPA (B&K) Mic Powering | +130 V dc max, (non-phantom) |
| Phantom Powering | +48 V dc, +/- 4 V dc |
| Power Consumption | 12 watts maximum |
| Power Requirements | 100V to 240V, 50/60 Hz |
| Dimensions/Shipping Weight | 19” W x 1.75” H x 12” D, 15 lbs.. |


